Accessories Parts for UV and Ozone Sterilizer

UV and Ozone Parts

UV LAMP AND OZONE LAMP:

  • Single wavelength output at 254 nm and dual wavelength output at 185 nm and 254 nm
  • Lamp length: 357 mm, 846 mm, 1554 mm
  • Electronic ballast for UV lamp: 18 W, 36 W, 80 W, 150 W, Electricity: 220-240 VAC; 50/60 Hz

Showing all 3 results

QUARTZ SLEEVE For UV Lamp

  • High purity quartz to allow maximum UV rays transmission to achieve optimum sterilization.
  • Quartz sleeves:
    • ZP Quartz sleeve designed for UV immersion unit.
    • Standard quartz sleeve:
      • Tube length: 400 mm, 890 mm, 1600 mm
      • O.D: 23 mm, I.D: 20 mm, Thickness: 1.5 mm
  • Single Open End for UV lamps and Double Open End for Ozone generating UV lamp.
UV and Ozone Parts
UV and Ozone Parts

OUR UV STERILIZER HAVE 5 ADVANTAGES OVER COMMON UV STERILIZER

    1. We use a single piece of quartz sleeve + quartz holder to give much better seal with the female thread of S.S chamber; quartz sleeve well fitted with this holder by tough silicone ring. So it really is trouble free; no worry of water leak around quartz sleeve anymore.
    2. When you require to clean the outer surface of quartz sleeve; you just unscrew this holder single time, you can clean the quartz surface effectively.

<li”>If you notice plastic plate with 4 screws; this is the access to put UV lamp inside quartz sleeve = complete protect inside quartz sleeve. </li”>

  1. Our UV lamp well fitted inside quartz sleeve = no moving or no displacement; because we use S.S spring + plastic cap + 4 screws to firmly hold the UV lamp in position.
  2. We also provide translucent plastic viewer at this quartz sleeve holder to view the blue light of operating UV lamp.