| Available
best technology to remove Iron - Manganese - Hydrogen sulfide |
|
What is Super Catalyst? |
- Super Catalyst®
is Iron removing filter.
- Super Catalyst®
is Mangenese removing filter.
- Super Catalyst®
is Hydrogen sulfide removing filter
|
| Essential
facts of Super Catalyst® |
pH: Super Catalyst® media is stable within a range of 5.0 to 9.0 pH. However, keep in mind that
the generally acceptable range for drinking water is 6.5 to 8.5 pH. At extreme
ranges of pH (both low and high), contaminant removal and bed stability are
adversely affected. This should be considered in applications operating at the
high and low ends of Super Catalyst®'s 5.0 to 9.0 pH range. We suggest conducting
a test for the ORP (Oxygen Reduction Potential) before using Catalyst-Supreme®.
If the ORP is less than 100, some form of pre-oxidation must be used. |
| Oxidizers: The use of oxidizers (e.g. oxygen, chlorine, ozone, hydrogen peroxide, potassium
permanganate, etc.) greatly enhances the action of Super Catalyst®.
An added benefit of using oxidizers with Super Catalyst® is the media's ability to remove 70% to 100% of the oxidizers utilized, thereby
eliminating the need for additional water treatment equipment. Organic Iron
(heme, pink-water, etc.): This problem can be overcome by the use of potassium
permanganate on a continuous basis. Intermittent regeneration with potassium
permanganate has been highly successful. |
| TDS: The
maximum acceptable TDS level for drinking water is 500 ppm. Super Catalyst® media may be successfully applied at levels exceeding 1100 ppm TDS. However,
at high TDS levels, highly ionized salts, such as sodium chloride, will require
the use of added oxidizers. |
|
| Typical
application |
- Iron,
Hydrogen sulfide and Manganese removal
- Turbidity
reduction
- Dechlorination
- Taste and
Odor removal
- RO and
DI pretreatment
|
| |
|
| General
specifications |
| Service flow rate |
4
gpm/cu.ft. |
| Freeboard |
30%-50% |
| Backwash
Rate |
10-12
gpm/sq.ft. |
| Bed
Depth |
20
inch minimum |
| pH
Range |
5.0-9.0 |
| Removal Capacity (Normal) |
Iron:
20 ppm |
| |
Hydrogen
Sulfide: 12 ppm |
| |
Manganese:
8 ppm |
| Color |
Brown |
| Physical
Form |
Granular |
| Bulk
density |
27.5
Kgs/25 Lit |
| Odor
and Taste |
None |
| Life
Expectancy |
Essentially
unlimited for low Contaminant concentrations |
|
Ex-work price: 2.50 Euro/Liter, 20 Liters / Sack ( Prices subjected to change without notice) |
|
